Silicone sealant

Pereseal N Weatherproof Neutral Seal Silicone

Pereseal N

Neutral-cure silicone for windows, doors, façades and roofs. Low odour, non-corrosive to metals, and takes up to ±30% joint movement.

Pereseal N Weatherproof Neutral Seal Silicone cartridge

Features

  • Neutral (oxime) cure with low odour
  • Non-corrosive to metals, concrete and vehicle paintwork
  • Joint movement up to ±30%
  • Tack-free in 15 minutes
  • Primerless adhesion to most materials
  • Service temperature −50 °C to +150 °C
  • UV resistant and weatherproof
  • Low shrinkage, non-sagging

Where to use it

  • Window and door frames
  • Glazing on masonry, concrete, stone, glass, aluminium and most plastics
  • Roofing, gutters and rainwater goods
  • Building and civil-engineering joints
  • Air-conditioning ducts
  • Containers and vehicles
  • Boats and marine fittings
  • Electrical and electronic component joints

Pack sizes

  • 280 ml cartridge — 25 per carton

Colours

  • White
  • Black
  • Clear
  • Grey

About Pereseal N Weatherproof Neutral Seal Silicone

Pereseal N is our neutral-cure weatherproofing silicone. It cures with a mild oxime smell instead of vinegar and doesn't corrode metals or attack alkaline surfaces like concrete, so it goes where an acetoxy silicone can't: aluminium frames, masonry, stone and most plastics.

It comes in two formulas. Clear is soft (Shore A 15) with over 200% elongation. Black, white and grey are high-modulus (Shore A 42) for firmer perimeter and façade joints. Both take ±30% movement and work from −50 °C to +150 °C.

Use it for window and door perimeters, façade and roofing joints, gutters, containers and vehicles. It's tack-free in about 15 minutes and cures 10 mm deep in 7 days.

Before you apply

Standards and tests

  • Tested by TÜV SÜD PSB (2014) to the ASTM C920:2008 test methods: no staining (ASTM C510), no sag (ASTM C639), no bond failure under cyclic movement (ASTM C719), no cracking after accelerated weathering (ASTM C793)

Good to know

  • Not for paint coatings
  • Not for copper
  • Not for polycarbonate or acrylic sheet under tension
  • Not for traffic areas or joints subject to abrasion
  • Joints from 3 mm × 3 mm up to 30 mm wide; tool within 5 minutes

Data sheets and documents

Check the data sheet for substrates, limits and ratings, or ask us.

Technical data sheetEN16 Sept 2026

Pereseal N Black, White and Grey TDS 2026

Technical data sheet for black, white and grey Pereseal N neutral silicone sealant.

Safety data sheetEN16 Sept 2026

Pereseal N Black, White and Grey SDS 2026

Safety data sheet for black, white and grey Pereseal N neutral silicone sealant.

Technical data sheetEN16 Sept 2026

Pereseal N Clear TDS 2026

Technical data sheet for the clear Pereseal N neutral silicone sealant.

Safety data sheetEN16 Sept 2026

Pereseal N Clear SDS 2026

Safety data sheet for the clear Pereseal N neutral silicone sealant.

Test reportEN

Pereseal N Test Report

CatalogueEN

Pereseal N Catalogue

Related applications

Guides

Questions about Pereseal N for your joint? Send us the substrates and sizes.

Ask about this product